Armorin requires no primer paint. Designed for use on both new and rust-covered surfaces in corrosive urban and industrial conditions.
POWERFUL and DURABLE 4-in-1 – 8 years of protection!
For vertical iron structures, when the substrate is properly prepared and painted according to the application instructions. Resistance is reduced in areas of water accumulation and exposed to mechanical damage.
Directions for use:
Remove loose rust and residues of old or damaged paints. Clean and degrease metal surfaces before painting. For zinc, aluminum and copper, apply a primer for non-ferrous metals. For smooth surfaces, sand them with fine sandpaper. Before painting, the paint should be thoroughly mixed in the package. Apply with a brush, roller or spray – two coats. Make sure that the entire coating, including edges and corners, is well covered with paint. Apply the next layer at an interval of about 8-10 hours after the previous layer is applied.
For protection, the minimum dry film thickness should be a minimum of 100 micrometers (2 properly applied layers). Clean tools with phthalic paint solvent.
